There are currently two sizes, with travel from 15 to 50 mm. They are made with an anodized aluminium body; the slide is supported on cylinders made of hardened and ground steel or stainless steel (on request), with pitch 1 adjustment screw.
Sliding on self-lubricating bronze bushings.This type of construction makes the product usable even in clean environments such as in the pharmaceutical, medical and food sectors, etc., and despite being very small, they provide high stability to the devices they are applied to.
Accessories are possible for angular and multi-axis positioning and for motor drives.
Overall dimensions
| Table Model | A | B | Travel | D | E | F | G |
| TRP.40-15 / 15x15 | 40 | 80 | 15 | 28 | 50 | 16 | 17 |
| TRP.40-30 / 30x30 | 40 | 95 | 30 | 28 | 65 | 16 | 17 |
| TRP.60-30 / 30x30 | 60 | 120 | 30 | 48 | 85 | 36 | 17 |
| TRP.60-50 / 50x50 | 60 | 140 | 50 | 48 | 105 | 36 | 17 |
Control screw Ø6, pitch 1.
Positioning accuracy 0.05 mm.
Position indication by engraved scale on the side.
Travels available: 15, 30, 50; on a single-axis or with crossed movement.
Allowed loads and moments (static)
FV=FL=50N
FA=30N
MT=ML=MR = 2Nm
Vertical mounting as Z-AXIS (TRP40 and TRP60)
| Table Model | A | B | C |
| TRP40 travel 15 | 28 | 132 | 70 |
| TRP40 travel 15x15 | 28 | 146 | 84 |
| TRP40 travel 30 | 28 | 147 | 85 |
| TRP40 travel 30x30 | 28 | 161 | 99 |
| TRP60 travel 30 | 48 | 172 | 100 |
| TRP60 travel 30x30 | 48 | 186 | 114 |
| TRP60 travel 50 | 48 | 192 | 120 |
| TRP60 travel 50x50 | 48 | 206 | 134 |
Can be mounted in all 4 directions.
Mechanical analog position indicator (TRP60 only)
Direct readout 0.01 mm.
Riser plates.
Axis drive with stepper motor (TRP60)
| POWER | Max torque | Torque at 500 rpm | Torque at 1000 rpm |
| 24 VDC |
0.2 Nm at approx. 250 rpm | 0.13 Nm approx. | 0.05 Nm approx. |
| 48 VDC | 0.2 Nm at approx. 500 rpm | 0.2 Nm | 0.13 Nm approx. |
Driven by a stepper motor, 200 pulses/revolution (1.8°). Screw Ø6, pitch 1.
The screw slides on a self-lubricating, threaded bronze bushing that ensures durability, accuracy and reduced play (0.02 mm).
The system includes: stepper motor, spacers and fastening interface, joint.
Riser plates are available if necessary.
Simple rotating base
| Model | A | B | H | D | Degrees rotation |
| BGS 40 |
40 | 28 | 20 | 40 | +/- 20 |
| BGS 60 | 60 | 48 | 20 | 60 | +/- 30 |
Base with manual positioning and screw lock.
Swivel base - Mounting above and below single-axis and double TRP60
| Max axial force = A | 50N |
| Max torque = C | 1.5Nm |
Swivel base, horizontal-axis mounting
| Axial load capacity = A | 20N |
Using a specific square, it is possible to use the swivel base with rotation on a horizontal axis.
The holes provided are compatible for mounting on the TRP 60 carriage
(single-axis) or on top (TRP 60XY).
Tilt range ±15°.